Ricoh Aficio AP610 Maintenance Manual page 28

Paper and Other Media
C
To set the paper size and feed direction, Press the {Menu} key.
The [Menu] screen appears on the display.
D
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
Menu:
Paper Input
The paper selection menu appears.
E
Check [Bypass Size] appears, and then press the {# Enter} key.
The paper size selection menu appears.
F
Press the {U} or {T} key to display the size and orientation of the paper
in the bypass tray.
Bypass Size:
*11 x 8 1/2
After about two seconds, the display returns to the menu.
G
Press the {Online} key.
The initial screen appears.
❒ To load thick paper, OHP transparencies, or envelopes, make settings for
thick paper or OHP transparencies using the control panel and printer driv-
er.
❒ The number of pages that can be loaded in the bypass tray differs depend-
ing on paper type. Make sure paper is not stacked above the paper guides
inside the bypass tray.
For details about control panel settings for custom size paper or special pa-
per, see p.29 "Specifying custom size paper for the Bypass Tray".
28