Ricoh 9016 Troubleshooting Manual page 56

Troubleshooting When Using the Printer Function
Problem
Page layout is
not as expected.
Photo images
are coarse.
Solid lines are
4
printed as bro-
ken lines.
Optional com-
ponents con-
nected to the
machine are not
recognized
when using
Windows 95 /
98 / Me, Win-
dows 2000 / XP,
Windows Serv-
er 2003, or Win-
dows NT 4.0.
When using Win-
dows 95/98/Me,
Windows
2000/XP, or Win-
dows NT 4.0,
Auto Reduce/En-
large print does
not come out as
expected.
The print job is
not canceled
even when the
machine is
switched to of-
fline status.
Images are in-
complete, or ex-
cess pages are
printed.
50
Cause
Print areas differ Adjust the [Printable area:] setting in the [Printer Configura-
depending on the tion...] dialog box on the [Print Settings] tab in the RPCS
machine used. In- printer driver. See the printer driver Help.
formation that fits
on a single page
on one machine
may not fit on a
single page of an-
other machine.
Some applica- Use the application's settings to specify a higher resolution.
tions print at
lower resolution.
Dither patterns Make the following settings with the printer driver:
do not match.
• Change the [Dithering:] setting on the [Image Adjust-
ments] tab in the [Change User Settings] dialog box, on
the [Print Quality] tab in the RPCS printer driver. See the
printer driver Help.
Bidirectional Set up optional devices on the Properties of the machine.
communication
See the printer driver Help.
is not working.
- Make sure the application's paper size and orientation set-
tings match those of the printer driver.
If a different paper size and orientation are set, select the
same size and orientation.
- Even when the machine is offline, printing is performed
when [Job Acceptance Priority] is selected for [Signal Control]
in [Parallel Interface] in [Interface Settings] under [System Set-
tings]. Select [Printer Priority] for [Signal Control].
See "Interface Settings", General Settings Guide.
You may be us- Use the same size paper as that selected in the application.
ing paper small- If you cannot load paper of the correct size, use the reduc-
er than the size tion function to reduce the image, and then print.
selected in the
See the printer driver Help.
application.
Solution