Ricoh 9016 Troubleshooting Manual page 52

Troubleshooting When Using the Printer Function
Problem
Image is dirty.
Print result dif-
fers from the
display.
Print result dif-
fers from the
display.
Print result dif-
4
fers from the
display.
Characters differ
from the display.
Characters differ
from the display.
It takes too
much time to re-
sume printing.
It takes too
much time to re-
sume printing.
Optional com-
ponents con-
nected to the
machine are not
recognized
when using
Windows
95/98/Me, Win-
dows 2000/XP,
and Windows
NT 4.0.
Paper is not fed
from the select-
ed tray.
46
Cause
Use of non-rec- Use manufacturer-genuine toner. Contact your service
ommended ton- representative.
er can result in
loss of print
quality and oth-
er problems.
A non-Win- Check the application supports the printer driver.
dows OS is be-
ing used.
The machine is Use the machine's printer driver and check the machine is
not selected for the designated printer. See "Setting Up the Printer Driv-
printing. er", Printer Reference.
Data transmis- Check whether there is failed or cancelled data remaining.
sion failed or See "Checking the Error Log", Printer Reference.
was cancelled
during printing.
The print densi- Adjust the image density. See the printer driver Help.
ty is too dark.
The loaded pa- Printing on recommended paper produces better resolu-
per is unsuitable. tion. See "Copy Paper", About This Machine.
The data is so If the Data In indicator is blinking, data is being processed.
large or com- Simply wait until printing resumes.
plex that it takes
time to process.
The machine To resume from Energy Saver mode, it has to warm up,
was in Energy and this takes time. See "ENERGY STAR Program",
Saver mode. About This Machine.
The option set- See the printer driver Help.
up in printer
properties is not
configured
when bidirec-
tional transmis-
sion is not
enabled.
When you are Set the desired input tray using the printer driver. See the
using a Win- printer driver Help.
dows operating
system, printer
driver settings
override those
set using the
display panel.
Solution