Ricoh 9016 Troubleshooting Manual page 55

Problem
There is consider- "Sleep mode"
able delay between might be set.
the print start in-
struction and actu-
al printing.
There is consider- Processing time
able delay between depends on
the print start in- data volume.
struction and actu- High volume
al printing. data, such as
graphics-heavy
documents,
takes longer to
process.
Graphics print If the printer
out differently driver is config-
to how they ap- ured to use the
pear on screen. graphics com-
mand, the
graphics com-
mand from the
machine is used
to print.
Cause
The machine requires time to warm up if it has been in
"Sleep mode". See "Timer Settings", General Settings
Guide and "ENERGY STAR Program", About This Ma-
chine.
If the Data In indicator is blinking, data has been received
by the machine. Wait for a while.
Making the following setting on the printer driver may re-
duce the computer's workload.
For how to open the printing preferences dialog box, see
"Setting Up the Printer Driver", Printer Reference.
❖ PCL 6/5e
Select the lower value for the [Resolution] list on the
[Print Quality] tab in the printing preferences dialog box.
❖ PostScript3
If your operating system is Windows, select [PostScript
(optimize for speed)] in the [PostScript Output Option] list.
[PostScript Output Option] is located as follows:
• Windows 95 / 98 / Me
[PostScript output format:] on the [PostScript] tab in
the printing preferences dialog box.
• Windows 2000 / XP, Windows Server 2003
[PostScript Output Option] in [PostScript Options] on
[Advanced...] on the [Layout] tab in the printing pref-
erences dialog box.
• Windows NT 4.0
[PostScript Output Option] in [PostScript Options] on
[Document Options] on the [Advanced] tab in the
printing preferences (document defaults) dialog
box.
❖ RPCS
Select the lower value for [Resolution:] on the [Print Qual-
ity] tab in the printer driver's dialog box.
Select [Fast] for the [Document type] list on the [Print Qual-
ity] tab in the printer driver's dialog box.
To enable [Change User Settings...], select the [User settings]
check box.
See the printer driver Help.
If you want to print accurately, set the printer driver to
print without using the graphics command. See the print-
er driver Help.
Other Printing Problems
Solution
4
49