Detector Color Value - Festo SBSi Manual

Parameters
String
Confidence
String length
Position X
Position Y
Angle
Compare result
Meets reference
string
Compare result
Truncated

4.6.3.13 Detector Color value

Output of average color values RGB / HSV / LAB over one of the interfaces.
Color channel (Page 169)
Tab Color value (Page 165)
4.6.3.13.1 Color channel
Selection of Color models (Page 207)
The display of the image depends on the image chip and the selected detector.
A image, taken with a colour chip contains more information by the colour component than a
monochrome image. This feature can be used with the colour channel selection. By selection of single
colour channels specific zones can be intensified or weakend.
- Monochrome chip: Display always black/ white
- Color chip + Color detector: Display always colored
- Color chip + Object detector: Monochrome image, display depending on selected color model and color
channel
Page 164
Functions
Characters read
Value from 0-100%, shows how reliably a character has been read
Length of string
Position X in pixels
Position Y in pixels
Angle compared to horizontal line
Is an indication for the quality of a result. If no characters had to be replaced
according the reference string, this value is at 100%. The value decreases with
rising number of corrections
Indicates if string meets the reference string.
Indicates if minimum quality was reached.
Indicates if a part of the string was truncated.
or color channel on which the detector should work.
Vision Sensor SBSI/SBSC-EN, 8062650 - 1607b - 13/09/2016
Vision Sensor Manual