Advertisement
GUIDE TO COMPONENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
o*
11.
12.
13.
Main Switch
Use to turn the power on or off.
Master
Eject
Open when removing the master eject box.
Container
Cover
Paper Delivery
Side
Use to align the prints on the paper delivery ta-
Plates
ble.
Paper Delivery
End
Use to align the leading edge of prints larger
Plate
than A4, 81/2" x 11".
Small Size Paper
Use to align the leading edge of prints that are
Delivery
End Plate
A4, 81/2" x 11" or smaller.
Paper Delivery
Table Completed
prints are delivered here.
Ink Holder
Drum Unit
Drum Unit Lock
Lever
Drum Rotation
Button
Pressure
Release
Lever
Master Cut Button
Master
Eject Unit
Open Button
4
Set the ink cartridge in this holder.
The master is wrapped around this unit.
Lift to unlock and pull out the drum unit.
Press to rotate the drum unit.
Use to install the master roll.
Press this button to cut the master leading
edge after installing a new master roll.
Press to remove misfed paper or a misfed mas-
ter.
Advertisement
