Advertisement
HOW TO USE IMAGE MAKE-UP MODE
Make-up Printing With The Optional
Document Feeder
D Under the following conditions, you
should set command sheets and original
on the exposure glass.
When using paste-up originals.
. When the command sheets and original are of different size.
. When
you use command sheets or originals made from roll-paper.
a When using coated paper or transparent paper as a command sheet, set the
command sheet and original separately into the document feeder.
c1
With the optional document feeder, you can designate areas to be edited in
Make-up mode inside the limits given below:
3
mm,
0.12"
5 mm, 0.2"
t
J
3 mm, 0.12"
t
3 mm, 0.12"
How to make prints in Make-up mode with the op-
tional document feeder
II
Press the Make-up key.
H
Set the desired
Fn No. and
press the Enter key.
29
Advertisement
