Advertisement
OPERATION
Press
the Master
Making
key.
Check the image position
of the
trial or proof print.
If the
image position is not correct,
adjust it using the Image Position
keys (~ See page 21) or the side
plate fine adjusting
dial (~
See
page 22).
Make your prints.
After the last page of each printing
set is fed out to the paper delivery
table, the tape dispenser drops a
strip of paper on the top of the pa-
per stack.
If the power switch of the optional
tape dispenser is turned off or the
tape dispenser
is not installed
in
your machine,
the group printing
cycle stops after each set is deliv-
ered.
Remove
the set of prints
from the paper delivery table and
press the Print Start key to start
the next group printing cycle.
49
Advertisement
