Advertisement
CHANGING
DEFAULT SET'INGS
(SERVICE
PROGRAM
MODE)
SP No.
80
82
Mode
Auto Quality Start
setting
Skip Feed Number
Funct30n
If the machine is not used for a long period of
time, the image density might decrease
because the ink on the drum might dry. The
Auto Quality Start function automatically
recovers image density quality after a selected
time has passed, regardless of the number of
times the machine is used. You can also
select how many times the Quality Start mode
IScarried out after the following time period
has passed. If Auto Quality Start is set to he
"No", you can regain print quality by making a
few extra prints.
J Default:
Auto Quality Start mode:
1
0 to 6 hours:
o
6 to 32 hours:
2
32 to 72 hours:
3
J Adjustment value:
Auto Quality Start mode
O: No 1: Yes
O to 6 hours:
O to 10 times
6 to 32 hours:
O to 10 times
32 to 72 hours:
O to 10 times
J If you use the Quality Start function before
6 hours have passed after the last
operation, the image density may not be
recovered earlier. However, it is convenient
to use this function when you change drum
unit and make prints before 6 hours have
passed after the last operation.
lVhen you use the Skip Feed Printing
Iunction, you can select how many times the
kum rotates while one sheet of paper is fed.
If
you select more than 2 times, you can also
~eiect whether you use paper longer than 447
mm, 17.5" or not.
J Default:
Skip Feed Number: 2
Long sheet:
o
J
Adjustment value:
Skip Feed Number:
1 to 9 times
Lorm sheet:
O: No 1: Yes
134
Advertisement
