Advertisement
CHANGING
DEFAULT SEITINGS
(SERVICE
PROGRAM
MODE)
User codes
With the user code
function,
operators
must input an authorized
code
before the machine
will operate.
The machine
keeps rack of the number
of prints
made
under
each code.
In this mode,
the following
20 user
codes (fixed) can be
used to access the machine.
382, 191, 182, 173, M4, 155, 146, 137, 128, 119,482,
291, 282, 273, 264, 255, 246,237,
228, 219
IJ To prevent unauthorized
users from accessing the machine note down the
codes and then black out the codes from this manual.
How to enable user code mode (# 120)
The following
procedure
explains
how to enable
user code mode. This
must be done before a user code can be input.
n
Press the keys on the operation
panel in the following
order.
(1)
Clear
Modes
key
(2)
Clear key
(3) Enter
key.
H
Enter
"120"
using
the Number
keys and press the Enter key.
139
Advertisement
