Advertisement
REPLENISHING
SUPPLIES
Master Roll Replacement
The Master End indicator (&J) blinks when it is time to replace the
master roll.
El
c1
la
El
D
Open the original table.
Lift the original table release lever
and slide the original table all the
way to the left.
Lift the pressure
release lever
in the direction of the arrow to
release the feed roller pressure.
J!
ni
-ii'
Remove the used master roll
and pull out both spools. Then,
insert both spools into a new
master roll.
When
the
Master
End
indicator
lights, it is necessary to replace the
master roll even if some master re-
mains on the old roll.
151
Advertisement
