Ack Nak Options - Datalogic Magellan 1100i Product Reference Manual

ACK NAK Options

This enables/disables the ability of the scanner to support the RS-232 ACK/
NAK protocol. When configured, the scanner and/or host sends an "ACK" when
it receives data properly, and sends "NAK" when the data is in error. Selections
for this option are:
• Disable
• Enable for label transmission — the scanner expects an ACK/NAK
response from the host when a label is sent
• Enable for host-command acknowledge — the scanner will respond with
ACK/NAK when the host sends a command
• Enable for label transmission and host-command acknowledge
START / END
Enable ACK NAK for Transmission
Enable ACK NAK for transmission and host command
Product Reference Guide
PROGRAMMING BARCODES
Enable ACK NAK for host command acknowledge
RS-232 Interface Features
Disable ACK NAK
DEFAULT
45