Ack Nak Retry Count - Datalogic Magellan 1100i Product Reference Manual
On-counter presentation omnidirectional bar code reader
Hide thumbs
Also See for Magellan 1100i:
- Product reference manual (208 pages) ,
- Quick reference manual (48 pages) ,
- Instructions (2 pages)
Table of Contents
Advertisement
ACK NAK Retry Count
START / END
This feature sets the number of times for the scanner to retry a label transmission under a retry condition.
000 = No retry
001 - 254 = Retry for the specified number of times
255 = Retry forever
To configure this feature, scan the "START/END" barcode above to place the unit in Programming Mode, then the
"Set ACK NAK Retry Count," followed by the three digits (zero padded) from the Alphanumeric table in
Appendix C, representing your desired retry count. Exit programming mode by again scanning the "START/
END" barcode above
48
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 003
Set ACK NAK Timeout Value
Magellan™ 1100i Scanner
Hide quick links:
Advertisement
Table of Contents
