Led And Beeper Indicators; Power On Alert; Eri Active State High - Datalogic Magellan 1100i Product Reference Manual
On-counter presentation omnidirectional bar code reader
Hide thumbs
Also See for Magellan 1100i:
- Product reference manual (208 pages) ,
- Quick reference manual (48 pages) ,
- Instructions (2 pages)
Table of Contents
Advertisement
LED and Beeper Indicators
Power On Alert
Disables or enables the indication (a single beep) that the scanner has finished
all its power up tests and is now ready for operation.
Disable
ERI Active State High
This setting specifies the active-state polarity of the External Read Indicator
signal to High; the inactive state is the opposite polarity.
NOTE
START / END
Product Reference Guide
PROGRAMMING BARCODES
Contact Technical Support for assistance in changing the ERI Active State
to Low if needed. Configuration of this feature is available only through
use of a special cable.
PROGRAMMING BARCODES
LED and Beeper Indicators
START / END
Enable
DEFAULT
ERI Active State = High
13
Hide quick links:
Advertisement
Table of Contents
