Scanning Features; Targeted Scanning Mode; Target Mode Active Time - Datalogic Magellan 1100i Product Reference Manual

Scanning Features

Targeted Scanning Mode

Upon pressing the button, the scanner will project an aiming pattern to assist in
centering over the barcode. Scanning then takes place as soon as the button is
released.
NOTE
Configuration options for Targeted Scanning Mode are:
•

Target Mode Active Time

• Target Mode Linger Time
Target Mode Active Time
Specifies the time duration the scanner attempts to decode labels while in the
targeted mode of operation.
Extra Short Duration
Medium Duration
DEFAULT
20
When add-ons are enabled and a barcode is being read while in Targeted
Mode, position the pointer at or near the end of the base label to ensure
the scanner will read both the base and add-on label.
Targeted Scanning Mode will read barcodes in any orientation.
The scanner will return to full pattern Omni-directional Mode after Target
Mode Active Time has elapsed.
PROGRAMMING BARCODES
START / END
Short Duration
Long Duration
Magellan™ 1100i Scanner