Step 4: Door Track - Arrow NP10867 Owner's Manual & Assembly Manual

Step 4: Door Track

You will need for this page:
6403
Track Splice
(QTY: 4)
(Painted)
Insert screws into bottom side only. The Gables will
fasten to the Door Track using the holes on the top side.
1 Align two (2) Door Tracks with the four (4)
holes in the bottom of the Door Track Splice
and insert four (4) screws.
2 Position the Door Slides in the Door Track.
Check that the fi nished length is 118 1/8" (300,0
cm). Set aside for use in Step 7.
The bottom side of the Door Tracks and the Door
Track Splice has only four (4) holes. The top side
has many holes. Fasten bottom side only.
Painted Part
9366
118 1/8" 300,0 cm
Finished Length
Slides should be installed in Door Track prior to installation. However, if this step is overlooked
or if the Slides need to be removed for maintenance, the following procedure may be used.
To remove or install Door Slides:
• Remove Doors from Slides and set aside.
• Using pliers, bend down a corner of the Door Track.
• Remove or install Door Slides.
• Carefully bend the corner back into position.
1 2
9366
Door Slide
Door Track
6403
4
CORRECT
Long Leg
on top.
Door Slide
Slide all four (4) Door Slides into Track.
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
20
END VIEW
INCORRECT
9366
20A