Arrow NP10867 Owner's Manual & Assembly Manual page 19

Step 3: Continued
You will need for this page:
(QTY: 14)
Overlap two (2) Roof Beams so that bottom slots
4
align but DO NOT INSERT BOLTS. Next, overlap
two (2) more Roof Beams to form a second Roof
Beam Assembly. DO NOT INSERT BOLTS .
Place both Roof Beam Assemblies back-to-
5
back to form a Double Beam. Insert ten (10)
bolts and nuts as shown below.
6 Insert four (4) bolts and nuts into slots from bottom.
Check that the fi nished length of the Assembly is
91 7/8" (233,4 cm). Set aside for use in Step 12.
10470
10470
BUILD ONE (1) BEAM
Six (6) holes align.
Two (2) holes align.
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
4
10470
Roof Beam
Place two (2) bolts thru slots
on each side of the Beam.
10470
10470
19
91 7/8" 233,4 cm
Finished Length
Overlap Length
6" 15,2 cm
End View of Double Beam
19A