Arrow NP10867 Owner's Manual & Assembly Manual page 26

Step 8: Continued
You will need for this page:
(QTY: 80)
Working one side at a time, lift the Panels into
2
place and secure top and bottom of Panels
with screws. Be sure to overlap ribs as shown
on the previous page.
3 Place a bolt and nut through the center hole
of the Panel everywhere Panels overlap, as
shown below.
Attach Wall Panels with screws thru all holes in top and bottom of Panels.
Corner Panel
Corner Panels lay under Front and Side Panels.
(QTY: 17)
Use bolts to attach Wall Panels where Wall Angles overlap.
Place bolt thru center hole where Panels overlap.
26
26A