Table of Contents
Advertisement
Operational Mode
visual Indications
Smoke/Heat Alarm
Alternating flashing
Memory (detector has
RED and AMBER
experienced an alarm
LEDs. 1 second RED/1
event within the last
second AMBER/ 10
hour)
seconds OFF,
repeating for 1 hour
Smoke Alarm Hush
Red LED blinks
Mode (SMART HUSH
®
every 2 sec.
CONTROL)
Locate
None
Initiating Alarm Detector
Green LED blinks once
(multiple detectors in an
per sec indicating that
interconnected system)
this is the unit
initiating the alarm in
an interconnected,
multiple detector,
system.
P/N 466-5308 • REV A • ISS 09MAY17
Audible Indications
None
After button push: Smoke alarm
pattern stops. (If there is too
much smoke, smoke alarm
pattern continues.)
After button push on non-ini-
tiating unit, only initiating unit
continues alarm pattern.
Unit in Smoke Alarm mode.
©2017 United Technologies Corporation
Action/Note:
Press test button to clear alarm
memory, or allow 1 hour time out
to return to normal operation.
NOTE: standard test sequence
will follow. (Push/release button
again to cancel test).
This feature is to be used
only when a known alarm
condition, such as smoke from
cooking, activates the alarm.
Use this to quickly locate the
alarm source and determine if
alarm is nuisance or real.
During alarm, the initiating alarm
red blink will be interrupted by a
green blink.
7
Hide quick links:
Advertisement
Table of Contents
