Battery - Interlogix SDX-135Z User Manual

Wireless smoke detector with heat and freeze sensor
Hide thumbs Also See for SDX-135Z:
Table of Contents

Advertisement

13. battery

NOTE: This detector is powered by non-replaceable, sealed lithium batteries. No battery installation or
replacement is necessary for the life of the detector.
NOTE: Constant exposure to high or low humidity or temperatures may reduce battery life.
WArNINg: DO NOT ATTEMpT TO OpEN ThE DETECTOr fOr ANy rEASON! Do not try to
repair the DETECTOr yourself. No serviceable parts included.
CAuTION: ThE bATTEry uSED IN ThIS DEvICE MAy prESENT A fIrE Or ChEMICAL burN
hAZArD If MISTrEATED. DO NOT rEChArgE, DISASSEMbLE, hEAT AbOvE 100°C (212°f) Or
DISpOSE Of IN fIrE.
Low battery
This detector is equipped with a low battery monitor circuit. If the battery capacity can no longer provide
adequate power for all alarm functions, the low battery condition will occur. See Troubleshooting Guide.
The detector battery must be discharged and the detector must be replaced within 7 days of the first occur-
rence of the "Low Battery Warning" to provide continuous detector protection. Reference the "Permanently
Disable Detector / Discharge Battery" section below for battery discharging instructions.
P/N 466-5308 • REV A • ISS 09MAY17
©2017 United Technologies Corporation
27

Advertisement

Table of Contents
loading

Table of Contents