Using The Openphone Ipc With An Interface; Program Start - DETEWE OpenCom 1000 User Manual

Using the OpenPhone IPC with an Interface

5. Using the OpenPhone IPC with an
Interface
If you have installed the OpenPhone IPC with a user interface, a telephone user
interface is displayed when the program is started.
If you have selected the "Default Skin" user interface, the interface will be similar to
the user interface of the OpenPhone 71 (only available on an OpenCom 100 or
OpenCom X300), OpenPhone 73 or OpenPhone 75. For the OpenPhone 73 and
the OpenPhone 75 different variants with keypad modules are available.
The following keys are also available:
■
Key to minimise, restore or close the OpenPhone IPC
■
Key to operate the OpenPhone IPC's recording function
■
Key to call up the options menu
5.1

Program Start

After the OpenPhone IPC is started, the
display will show the status of the log-in to
the communications system. During log-in,
the OpenPhone IPC software version's com-
patibility with the communications system is
checked and may then be updated. In this
case, confirm the output of the installation
script by pressing any key.
Program Start
15