General Information - DETEWE OpenCom 1000 User Manual

General Information

1. General Information
The OpenPhone IPC is a system terminal that can be operated using the
OpenCom 100/X300 or OpenCom 1000.
This system terminal is a PC-software based communications solution. No specific
hardware, other than the communications system, is required to operate the
OpenPhone IPC.
The OpenPhone IPC's technology is based on VoIP (Voice over Internet Protocol).
PC versions of all system telephones from the OpenPhone 7x product range are
available for the OpenCom 100 and OpenCom X300 communications systems,
and for the OpenCom 1000 communications system, the OpenPhone 73 and
OpenPhone 75 system telephones can be used.
In this user guide, those features of the OpenPhone IPC which set it apart
from the hardware-based system telephones OpenPhone 71, OpenPhone 73 and
OpenPhone 75will be described.
The OpenPhone IPC is available in two different versions: one with an active tele-
phone user interface and one without a user interface. The OpenPhone IPC
without the user interface can be integrated into Microsoft Outlook (for outgoing
calls).
Product-related licence keys are required for the operation of different communi-
cations systems.
Note: For more information on operating the
OpenPhone IPC, please refer to the "OpenPhone 71, 73, 75"
user guide.
3