Configuring The Openphone Ipc; Opencom Tab; Display Tab - DETEWE OpenCom 1000 User Manual

Configuring the OpenPhone IPC

4. Configuring the OpenPhone IPC
When starting the OpenPhone IPC for the first time, the configuration assistant
used to configure the OpenPhone IPC opens automatically. These options can
subsequently be accessed via the Options menu entry.
4.1

OpenCom Tab

4.2

Display Tab

The data required here (the communication
system's IP address and device ID) can be
obtained from your system administrator. The
Connection setting should only be changed
if you want to connect to the communications
system via an RAS dial-up connection (if
working at home or for a telecommuting
workstation).
This tab is not available for the version of the
OpenPhone IPCwhich does not have an
interface. Select the desired interface from
the Skin selection and the Device type.
Activate the Truecolor version for optimal
display quality. This option is only available if
the graphic card allows for a colour depth of
16 bit (65536 colours) or more.
You can also stipulate that the
OpenPhone IPC is automatically shown in the
foreground of your PC screen when you have
an incoming call. To establish this setting,
activate the Popup an incoming call option.
In Windows 2000 and Windows XP, a Tooltip is
also displayed in the task bar.
OpenCom Tab
11