G.2 Reidentifying Your Product - Anybus CompactCom 40 Network Manual

Appendix G: Conformance Test Guide
G.2 Reidentifying Your Product
After successful setting of the Setup Complete attribute in the Anybus Object (01h), the Any-
bus module asks for identification data from the host PROFINET IO Object (F6h). Therefore,
the attributes listed below shall be implemented and proper values returned.
Object/
Instance
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
PROFINET
IO Object
(F6h), In-
stance 1
®
Anybus CompactCom ™ 40 PROFINET IRT Network Guide
Attribute Explanation
#1,Device ID With this at-
tribute you
set the De-
vice ID of the
device
#2,Vendor ID With this at-
tribute you
set the Ven-
dor ID of the
device
#3,Station With this at-
Type tribute you
set the sta-
tion type of
the device
#8, I&M Or- With this at-
der ID tribute you
set the Order
ID that is
used in the
I&M data
With this at-
#10, I&M
Hardware tribute you
set the I&M
Revision
Hardware
Revision
With this at-
#11, I&M
Software tribute you
set the I&M
Revision
Software
Revision
With this at-
#13, I&M
Profile ID tribute you
set the I&M
Profile ID
#14, I&M With this at-
Profile Spe- tribute you
cific type set the I&M
Profile Spe-
cific typ
#19, System With this at-
Description tribute you
set the de-
scription of
the system
Default Customer
sample
Device ID: Device ID:
0010h YYYYh
Vendor ID: Vendor ID:
010Ch XXXXh
(HMS)
"ABCC40- "Cust-PNIO-
PIR" Dev"
"ABCC40- "Cust-PNIO-
PIR" Dev"
(Hardware "0002h"
Rev.)
(Software "V2.5.3"
Rev.)
API number
0xF600
of profile.
(Generic
device)
0x0004 Profile spe-
cific type, de-
(Communi-
fined by
cation
profile.
Module)
"HMS Indus- "Customer
trial Net- HMI Inter-
works Any- face Module"
bus Com-
pactCom 40"
224 (258)
Comment
This information must match
the keys of the "DeviceIden-
tity" of the GSD-file.
Note that the GSD file key-
word "VendorName" must
correspond to the Vendor ID
value.
This information matches, in
the case of Anybus Compact-
Com 40 PROFINET IRT,
GSD keywords "DNS_Com-
patibleName" and "Order-
Number". The Station Type
must be equal to the "DNS_
CompatibleName", but it is
allowed to have a completely
different "OrderNumber", see
also I&M Order ID below.
This information must match
the keys of "theOrderNum-
ber" of the GSD-file.
Optional. This information
must match the keys of the
"HardwareRelease" of the
GSD-file.
Optional. This information
must match the keys of the
"SoftwareRelease" of the
GSD-file.
Optional, Only relevant for
multi-API implementations
like PROFIdrive.
Optional, Only relevant for
multi-API implementations
like PROFIdrive.
This information kan be read
by means of SNMP from the
network side.
SCM-1202-023 EN 1.8