Anybus CompactCom 40 Network Manual page 216

Appendix C: Flowcharts
C.4.2 Custom Configuration mismatch
This flowchart shows how to handle a configuration mismatch when the Real Identification has
been established by the host application (custom configuration).
Repeat for all
adaptable
modules/submodules
Fig. 20
®
Anybus CompactCom ™ 40 PROFINET IRT Network Guide
Application receives
Expected Identification
matches Real Identification
TRUE Real Identification can
be adapted to Expected
Send "Block"
Response
Pull mismatching
module/
submodule
Plug adapted
module/
submodule
Send
Ident_Change_Done
command
Expected_Ident_Ind
TRUE
FALSE
Identification
Done
SCM-1202-023 EN 1.8
214 (258)
FALSE
Send "Continue"
Response