Life Fitness CLUB SERIES Assembly Instructions Manual page 4

3/8 X 2-3/4" 15
3/8 X 3-3/4" 17
FIGURE 1
STEP 1:
• LOOSELY assemble the top of the PIVOT ARM SUPPORT (2) to the TOWER (1) using four RH CAPS (40), two 3/8 X 2-3/4"
BOLTS (15), four 3/8" SAE WASHERS (21), four 3/8" RH WASHERS (22) and two 3/8" LOW HEIGHT LOCK NUTS (19) as
shown in FIGURE 1.
• LOOSELY assemble the bottom of the PIVOT ARM SUPPORT (2) to the TOWER (1) using four RH CAPS (40), two 3/8 X 3-3/
4" BOLTS (17), four 3/8" SAE WASHERS (21), four 3/8" RH WASHERS (22) and two 3/8" LOW HEIGHT LOCK NUTS (19) as
shown in FIGURE 1.
1/2
0
2
22
21
1/2 1/2
1 2
1
40
19
1/2
3 4
4
6958401 CABLE
1/2 1/2
5
6