Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Life Fitness INT-DSL
Summary of Contents for Life Fitness INT-DSL
- Page 1 Integrity and Club Series+ Treadmill (INT-DSL, CST-DSL, INTDSE, INTDST, INT-TRD, INT-TRD-B1, INT-TRD-CS, INT-TRD-CS-B1, CST-DST, CST-DE, INT-SSL, INTSSE, INTSST, PF-INT-TRD, PF-INT-TRD-02, PF-INT-TRD-11, PF-INT-SSL-ALLXM-11, INTOTF, OT-INT- TRD) Assembly Instructions 1015934-0001 REV AC...
- Page 3 Latin America and Caribbean* Spain Hong Kong Life Fitness, LLC Life Fitness IBERIA Life Fitness Asia Pacific LTD 10601 W Belmont Ave C/Frederic Mompou 5,1º1ª 26/F, Global Trade Square Franklin Park, IL 60131 U.S.A. 08960 Sant Just Desvern Barcelona...
- Page 4 User and Service Documents Link https://lifefitness9512.zendesk.com/hc/en-us https://www.lftechsupport.com/web/document-library/documents Additional information is available online using the links above. أ علاه إل ر إبط باستخدإم إ لإ ن تر نت على إضافية معلومات تتوفر 点击上面的链接可在线获取更多信息。 Flere oplysninger er tilgængelige online gennem linket ovenfor. Bijkomende informatie is online beschikbaar via bovenstaande link.
-
Page 5: Table Of Contents
Copyright 2022, Life Fitness, LLC. All Rights Reserved. Life Fitness, Hammer Strength, Cybex, ICG and SCIFIT are registered trademarks of Life Fitness, LLC and its affiliated companies and subsidiaries. Disclaimer: Images and specifications are current as of the date of publication and are subject to change. -
Page 6: Getting Started
1. Getting Started Safety Instructions Read all instructions before use. CAUTION: Any changes or modifications to this equipment could void the product warranty. CAUTION: Risk of injury to persons – to avoid injury, use extreme caution when stepping onto or off of a moving belt. - Page 7 • Allow LCD consoles to “normalize” with respect to temperature for one hour before plugging the unit in and using. • When the product is not in use, Life Fitness recommends unplugging the product. Disconnect from the electrical outlet when not in use, and before putting on or taking off parts. To disconnect, turn power OFF at the ON/OFF switch, then remove plug from electrical outlet.
-
Page 8: Consignes De
Consignes de Sécurité Veuillez lire toutes les instructions avant usage. AVERTISSEMENT : Une utilisation incorrecte ou excessive de l'appareil peut entraîner des blessures. Life Fitness Family of Brands Recommande VIVEMENT aux utilisateurs de passer un examen médical complet avant d'entamer un programme d'entraînement, et tout particulièrement dans les cas suivants : antécédents familiaux d'hypertension (pression sanguine trop élevée) ou de pathologies cardiaques, utilisateurs de 45 ans ou plus, tabagisme, hypercholestérolémie (taux de cholestérol sanguin trop élevé), obésité, absence d'exercice physique depuis un an ou plus. - Page 9 à la clientèle. Nous vous en fournirons de nouvelles. Les étiquettes d’avertissement sont expédiées avec les appareils et doivent être installées avant utilisation de ces derniers. Life Fitness Family of Brands n’est pas responsable des étiquettes manquantes ou endommagées.
-
Page 10: Set-Up
Set-Up Read the entire manual before setting up the treadmill. Place the treadmill where it will be used before beginning the setup procedure. Electrical Power Requirements The treadmill requires a dedicated* line with isolated neutral according to the electrical configurations listed in the chart below. -
Page 11: How To Position And Stabilize The Safety Clearances
How to Position and Stabilize the Treadmill Follow all safety instructions. Move the treadmill to the location in which it will be used. NOTE: See How to Adjust and Tension the Striding Belt to center the striding belt. Safety Clearances The following information is supplied as regional reference data regarding safety clearances around the exterior of the treadmill. -
Page 12: Turning The Unit On
Turning the Unit On To turn the treadmill on, locate the ON/OFF power switch at the front of the treadmill and turn it ON. Stride Sensor Auto-Shutoff System The Stride Sensor auto-shutoff system detects whether a user is on the belt/deck. If the user leaves the belt/deck during a workout, the system is triggered and the following message is displayed, User not detected on belt - press “OK”... -
Page 13: Immobilization Method - Integrity Sl
Immobilization Method - Integrity SL - Treadmill The purpose of immobilizing the treadmill is to prevent unauthorized use. The system causes immobilization of the treadmill when activated. 1. Enter Manager's Configuration: • Press the SPEED UP / DOWN arrow keys in the following sequence: UP, DOWN, UP, DOWN. •... -
Page 14: Immobilization Method - Discover
Immobilization Method - Discover Console The purpose of immobilizing the treadmill is to prevent unauthorized use. The system causes immobilization of the treadmill when activated. 1. Tap the LANGUAGE icon to access the SELECT LANGUAGE screen. 2. Tap the lower part of the screen in the following sequence: Lower-Left, Lower-Right, Lower-Left, and Lower-Right. 3. -
Page 15: Product Overview
2. Product Overview Deluxe Models INT-DSL, CST-DSL, CST-DST, CST-DE, INTDSE, INTDST, INT-TRD, INT-TRD-B1, INT-TRD-CS, INT-TRD-CS-B1 NOTE: Integrity SL Console is shown as a reference in this image. Item Description Qty. Console Speed Up/Down Arrows Cup Holder Contact Heart Rate Sensors... -
Page 16: Simple Models
Simple Models INT-SSL, INTSSE, INTSST, PF-INT-TRD, PF-INT-TRD-02, PF-INT-TRD-11, INT-TRD, INT-TRD-B1, PF-INT-SLL-ALLXM-11 NOTE: Integrity SL Console is shown as a reference in this image. Item Description Qty. Console Cup Holder Contact Heart Rate Sensors Walking Belt Emergency Stop Magnet Emergency Stop Lanyard Page 14 of 46... -
Page 17: Intotf, Ot-Int-Trd
INTOTF, OT-INT-TRD Item Description Qty. Console Cup Holder Walking Belt Emergency Stop Lanyard Emergency Stop Magnet Page 15 of 46... -
Page 18: Mounting And Dismounting The User Position
Mounting and Dismounting the Treadmill Use the handrails to enhance stability when mounting or dismounting a treadmill. Never mount or dismount the treadmill while the running belt is moving. Use the STOP button on the console to end a workout and stop the running belt. -
Page 19: Assembly: One-Box Models
3. Assembly: One-Box Models Models: PF-INT-TRD, PF-INT-TRD-02, PF-INT-TRD-11, INT-TRD, INT-TRD-CS Hardware and Required Tools Item Description M8 X 20 FLANGE HEX HEAD CAP SCREW M4.2 X 19 PHILLIPS PAN HEAD SCREW M6 X 16 PHILLIPS PAN HEAD SCREW GROMMET M5 X 16 PHILLIPS PAN HEAD SCREW M5 X 14 PHILLIPS PAN HEAD SCREW (for Integrity Console) (for Discover Console) -
Page 20: Base To Console Cable
Base to Console Cable Connections Integrity SL Item Description CSAFE Base Interface Cable (Base Switches, ESS, Lifepulse) Base Power Base Com TV (optional) Discover SE3HD / ST Item Description Base Power Base Interface and Base Com Coax CAT5E HDMI Page 18 of 46... -
Page 21: Attach Console
Attach Console Integrity SL Item Description Qty. Console M5 X 14 Phillips Pan Head Screw Ground Screw (see Note) 1.9 Nm (1.4 ft. lbs.) NOTE: The Ground Screw is one of the M5 X 14 Phillips Pan Head Screws accounted for in the row above. Discover SE3HD / ST Item Description... -
Page 22: Lifting The Uprights
Lifting The Uprights 1. NOTE: Do not remove the pivot screws. Loosen the pivot screws on the left side and right side of the upright. Item Description Pivot Screw 2. NOTE: Two people are required to lift the upright into position. Lift the upright into position. -
Page 23: Secure Grounding Braid Cable To Base
Secure Grounding Braid Cable to Base Frame Item Description Qty. Grounding Braid Cable (attached to base) M5 X 16 Phillips Pan Head Screw 2.8 Nm (2.0 ft. lbs.) Attach Motor Side Shrouds Snap the motor side shrouds to the base frame. Item Description Qty. -
Page 24: Rails
Attach Anti-Slip Rails Push the anti-slip rail forward to lock into place. Secure with the screw. Item Description Qty. Anti-Slip Rail, Right Anti-Slip Rail, Left M6 X 16 Phillips Pan Head Screw 4 Nm (3 ft. lbs.) Attach Front Shroud 1. -
Page 25: Cover
Attach Motor Cover 1. Snap the Tinnerman clips on the motor cover into place. Item Description Motor Cover 2. Securely tighten the two top screws of the front shroud. Item Description Screw 1.5 Nm (1.1 ft. lbs.) Page 23 of 46... -
Page 26: Assembly: Multi-Box Models
4. Assembly: Multi-Box Models Models: INT-SSL, INT-DSL, CST-DSL, INT-TRD-B1, INT-TRD-CS-B1, INTDSE, INTDST, INTSST, INTSSE, INTOTF, OT-INT-TRD, CST-DST, CST-DE, PF-INT-SLL-ALLXM-11 NOTE: Club Series Plus and Arabic Skus are two-box configurations (line cord comes in base box); all others are three- box configurations. -
Page 27: Secure Grounding Braid Cable To Base
Secure Grounding Braid Cable to Base Frame Item Description Qty. Grounding Braid Cable M5 X 16 Phillips Pan Head Screw 2.8 Nm (2.0 ft. lbs.) Attach Bridge Weldment to Uprights 1. Attach bridge weldment to uprights. Item Description Bridge Weldment M8 X 20 Flange Hex Head Cap Screw 2. -
Page 28: Secure Grounding Braid Cable To
Secure Grounding Braid Cable to Uprights Item Description Qty. Grounding Braid Cable M5 X 16 Phillips Pan Head Screw 2.8 Nm (2.0 ft. lbs.) Connect Cables Deluxe Models: Connect Heart Rate Cables and Keypad Cables. Simple Models: Connect Heart Rate Cables. Page 26 of 46... -
Page 29: Connect Base
Connect Base Cables Connect cables from left upright to the SIB. NOTE: Prior to handling electronics or cables, the installer should touch the metal frame of the unit to discharge static build up. This reduces the risk of damaging control electronics due to electrostatic discharge. NOTE: Connect coax that is run through the uprights to the end of the coax that runs in front of the treadmill frame. -
Page 30: Base To Console Cable
2. Secure upper bridge plastic to the bridge weldment with seven screws. Base to Console Cable Connections Integrity SL Item Description CSAFE Base Interface Cable (Base Switches, ESS, Lifepulse) Base Power Base Com TV (optional) Discover SE3HD / ST Item Description Base Power Base Interface and Base Com... -
Page 31: Attach Console
Attach Console Integrity SL Item Description Qty. Console M5 X 14 Phillips Pan Head Screw Ground Screw (see Note) 1.9 Nm (1.4 ft. lbs.) NOTE: The Ground Screw is one of the M5 X 14 Phillips Pan Head Screws accounted for in the row above. Discover SE3HD / ST Item Description... -
Page 32: Attach Lower Plastics To
Attach Lower Plastics to Bridge 1. Install grommets. 2. Attach lower bridge plastics to upper bridge plastics. Item Description Grommet Bridge Plastics, Lower M6 X 16 Phillips Pan Head Screw 4 Nm (3 ft. lbs.) 3. Secure lower bridge plastics to user arms. Attach emergency stop magnet. Item Description M4.2 X 19 Phillips Pan Head Screw... -
Page 33: Assembly
4. Insert cup holders. Press downward on the cup holders until the cup holders lock into position. Item Description Cup Holder Attach Rear Console Shroud Assembly Item Description Qty. Rear Cover M4.2 X 19 Phillips Pan Head Screw Grommet Console Mounting Bracket 1.5 Nm (1.1 ft. -
Page 34: Attach Side
Attach Side Shrouds Simple Models Deluxe Models Item Description Qty. Side Shroud, Right Side Shroud, Left M4.2 X 19 Phillips Pan Head Screw Grommet Washers (for Deluxe Models only) Simple Models: 1.2 Nm (0.89 ft. lbs.) Deluxe Models: 1.5 Nm (1.1 ft. lbs.) Attach Motor Side Shrouds Snap the motor side shrouds to the base frame. -
Page 35: Attach Anti-Slip Attach Front Shroud
Insert and tighten the screws into the motor side shrouds. Item Description Qty. M6 X 16 Screw 4 Nm (3 ft. lbs.) Attach Anti-Slip Rails Push the anti-slip rail forward to lock into place. Secure with the screw. Item Description Qty. -
Page 36: Attach Motor Cover
2. Loosely secure the top two screws to the frame. Tightly secure the bottom two screws to the base frame. Item Description M4.2 X 19 Phillips Pan Head Screw 1.5 Nm (1.1 ft. lbs.) Attach Motor Cover 1. Snap the Tinnerman clips on the motor cover into place. Item Description Motor Cover... -
Page 37: Attach Power Cord
Attach Power Cord Follow these steps if the power cord is not installed: 1. Insert the power cord into the receptacle. Item Description Power cord Cable support bracket M4 X 10 Phillips Pan Head Screws 2. Attach the cable support bracket to the frame using the two screws. Page 35 of 46... -
Page 38: Specifications
5. Specifications Specifications Heavy / Commercial EN ISO 20957 Class S Models: INT-DSL, INTDSE, INTDST, INT-TRD, INT-TRD-B1, INT-SSL, INTSSE, INTSST, PF-INT- TRD, PF-INT-TRD-02, PF-INT-TRD-11, INTOTF, OT-INT-TRD, PF-INT-SLL-ALLXM-11 Designed Use Home EN ISO 20957 Class H Models: INT-TRD-CS, INT-TRD-CS-B1, CST-DSL, CST-DST, CST-DE Maximum User Weight 400 lbs. - Page 39 Shipped Dimensions Shipped Dimensions One-Box Models (Base box) Physical Dimensions Multi-Box Models Length 82.25 in. / 209 cm 86 in. / 218 cm 86.5 in. / 219.71 cm Width 36.25 in. / 92 cm 39.5 in. / 100 cm 39.5 in ./ 100 cm Height 56 in.
-
Page 40: Tips
6. Service and Technical Data Preventive Maintenance Tips NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are subject to wear, as outlined below. -
Page 41: Treadmill
Using a voltmeter, verify power at outlet. If no power exists, reset circuit breaker at panel. Line cord is damaged. Replace line cord. Contact Life Fitness Customer Support. Line cord is improperly seated in socket. Inspect power connections at wall outlet and at machine for proper contact. - Page 42 • Incorrect console or power supply. • Line cord at treadmill • Power switch • All console connections • All lower electronics connections Contact Life Fitness Customer Support. Unit resets randomly or pauses. Probable Cause Corrective Action Power source is insufficient.
-
Page 43: Strap
Troubleshooting the Polar ® Heart Rate Chest Strap Heart rate reading is erratic or absent entirely Probable Cause Corrective Action Belt transmitter electrodes are not wet enough to pick up Wet the belt transmitter electrodes. accurate heart rate readings. Belt transmitter electrodes are not laying flat against the Ensure the belt transmitter electrodes are laying flat skin. -
Page 44: How To's
2. Grasp the service wheel lever and slide to the right and down to lock in place. Item Description Qty. Service wheel lever Frame The service wheel will lower and raise the rear feet off the floor. Item Description Qty. Service wheel Rear feet Floor... - Page 45 NOTE: Do not exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, contact Life Fitness Customer Support. Do not overtighten the tensioning bolts while making belt adjustments. Overtightening of bolts may over stretch and damage the striding belt or roller.
- Page 46 Tensioning an Existing Striding Belt 1. Press GO and operate the treadmill for five minutes at 5.0 MPH (8.0 KPH). NOTE: Do not run or walk on belt! 2. Reduce the speed to 2.0 MPH (3.2 KPH). Walk on the treadmill. Tightly grip the handrails and apply force with feet on the striding belt near the motor cover against the moving belt direction.
-
Page 47: What Is Covered
Who Pays Transportation and Insurance For Service If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness Family of Brands, will pay all transportation and insurance charges for the first year. You are responsible for transportation and insurance charge after the first year. -
Page 48: Changes In Warranty Not Effects Of State Laws
Changes in Warranty Not Authorized No one is authorized to change, modify or extend the terms of this limited warranty. Effects of State Laws This warranty gives you specific legal rights, and you may have other rights which vary from state to state and country by country.