Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Is Displayed - Ricoh 8035 Copy Reference Manual

If Your Machine Does Not Operate As You
Want

When a Message Is Displayed

The following chart contains explanations for the common messages. If other
messages appear, follow the instructions as they are displayed.
Note
❒ For messages that are not listed here, see General Settings Guide.
Message
Cannot detect
original size.
Check original
orientation.
Check paper size.
Rotate Sort is not
available with
this image size.
Cannot punch paper
of this size.
It is over sta-
pling capacity.
Cannot staple pa-
per of this size.
Duplex is not avi-
lable with this
paper size.

3. Troubleshooting

Causes
Improper original is
placed. See p.11 "Sizes dif-
ficult to detect".
Original is not placed.
Original is not placed in a
proper orientation.
Improper paper size is set.
A size of paper for which
Rotate Sort is not available
is selected.
ThePunch function cannot
be used with paper size se-
lected.
The number of sheets per
set is over the staple capac-
ity.
The Staple function cannot
be used with paper size se-
lected.
A paper size not available
in Duplex mode has been
selected.
Solutions
Select paper manually, not in Auto
Paper Select mode, and do not use
Auto Reduce/Enlarge function.
Place the original on the exposure
glass. See p.13 "Placing Originals on
the Exposure Glass" .
Place your originals.
Change the orientation of the origi-
nal.
If you press the {Start} key, copy
will start onto the selected paper.
Select the proper paper size. See
p.33 "Sort".
The following paper sizes are avail-
able for Punch mode: A3L, B4
JISL, A4KL, B5 JISKL, A5KL,
1
11"×17"L, 8 / "×14" L and
2
1 1
5 / "×8 / "KL. Select one of these
2 2
sizes.
Check the stapler capacity. See p.110
"Staple".
Select a paper size that can be used
in Staple mode. See p.110 "Staple".
The following paper sizes are avail-
able for Duplex mode: 11" × 17"L,
" × 14"L, 8 " × 11"KL. Select
1 1
8 / /
2 2
one of these sizes.
77