Entering The Machine Type Information - Konica Minolta bizhub 287 Service Manual

Security Function Ver. 1.02 Mar. 2016
F/W to be updated
FINISHER
SD
10.2.4

Entering the machine type information

• When MFP board is replaced, it is necessary to enter the machine type information.
• Refer to the following procedures to enter the machine type information.
A. Procedure
1. Insert the USB memory to the USB port.
2. Turn ON the main power switch.
3. Touch [Machine Type Select].
Appropriate board
FS control board (FSCB)
SD drive board (SDDB)
41
10. Firmware rewriting
Remark
Only when FS-533/FS-534 is
mounted
Only when FS-534SD is mounted
A7AHS1E021DA