Table of Contents
Advertisement
System Units
Activity and alerts can be found on the Units sub-menu, located next to Settings in the
bottom
Understanding the importance of the various units and their correct definition prevents
many mishaps later.
In this sub-menu, the user can add new units through the Add Unit button. The system
supports several types of communication at the same time transparently to the customer:
Z-WAVE wireless system, KNX linear system and security cameras on the ONVIF standard.
Once you select the desired type and click Add again, the controller will start scanning for all
the potential units that we want to set. Adding a unit will be performed parallel to the
scanning of the controller while clicking on the configuration button (usually 3 times
depending on the type of unit and its directory settings) while the camera is required to
press and hold the RESET UNIT button until the camera sound is heard. When the process is
completed, the name of the unit and the appropriate icon and management area of that
unit must be defined.
Once the unit is added, there is a possibility to see the unit's activity through in the Status
section. This can be very helpful when the device is not working properly for example and
the user can check the unit's activity.
The user can combine units from different systems, right now from the Z-Wave, KNX, or IP
work environments.
On the right side appears the table of the various units with the possibility to quickly locate
any unit using a filter – Filter Units or just filter the devices by name.
27
Advertisement
Table of Contents
