Table of Contents
Advertisement
General Settings - Z-WAVE System Setup
The Z-Wave submenu is visible and available for editing only for users with
technician/installer privileges!
When opening the Z-Wave Settings, the user is able to create associations from the
Associations tab and from the Advanced tab manage the Z-Wave network.
Associations are made directly between one device and another - it can control one device
or a small 'group' of other devices (typically 5 or 6 units). The advantage of using Association
is that commands are sent directly from the controlling device to the controlled device(s),
the commands are not sent via the central Z-Wave controller or in this case the Wanderfull
hub.
23
Advertisement
Table of Contents
