Table of Contents
Advertisement
You can get information about the update and choose whether to do it now or in the future.
Version updates refer to several options:
• Security updates made from time to time.
• Uploading new products to the management system.
• Connection and support for third party products such as alarm systems, air conditioners,
AV and more.
• Adding support for Z-Wave end products (all TouchWand products support wireless
updates to OTA).
If the client is not connected to the cloud services, it is possible to perform a remote update
by accessing and sending the update by remote software or sending an update file by email.
This service may incur an additional charge!
General Settings – BitWise and KNX System Setup
The Bitwise submenu is visible and available for editing only for users with
technician/installer privileges!
The Bitwise settings can be added and edited in the Settings tab. The client can check the
server status and client's connection by clicking on the Refresh as seen in the picture above.
When clicking the Enable connection checkbox, the user is able to connect with the BitWise.
In the Listen on IP field, the user should enter the IP address. By entering 0.0.0.0 the user
can access connections from any IP address and 127.0.0.1 for local connections.
The controller creates a TCP server and listens to the clients on the port specified in the
settings (7443 as example entered in the Port field).
20
Advertisement
Table of Contents
