Table of Contents
Advertisement
To check the operation of the system or to verify that certain conditions are working
properly, the system provides information about all the activities that occurred.
System Log Overview:
You can see the unit type (detector / shutter / lighting) in the left column - Unit.
If the unit is assigned to the room, you can see the division into rooms in the second column
on the left – Room.
The last activity of the system is in the third column on the left – Timestamp.
In the right hand you can see the event or type of change / activity taking place at any given
moment in the same unit that we review a blog – Event.
Skilled installers will test the operation of the various units and situations after building and
operating the different situations.
General settings - Green construction and energy consumption
TOUCHWAND's management system is designed to provide data on energy and energy
consumption in the building or at home.
For this purpose, it is important to specify that all units installed or, alternatively, the units
that are important to us to receive information on their power consumption, will include a
power controller.
There are several processes to follow:
On the energy screen, select the setting - Energy Options
17
Advertisement
Table of Contents
