Table of Contents
Advertisement
Also the user can see in which groups and scenarios a selected unit is active from the
sections Present in scenarios and Present in groups. Each unit can be attached to different
spaces or groups.
A button appears at the top to immediately add the unit to any group – Manage Unit Groups.
The importance of adding a unit to groups as can be seen below will greatly contribute to the
efficiency of constructing each scenario. Instead of marking each unit individually, you can
choose a total of units with a common feature that we define. For example, all the lights in
the bedroom and / or all the blinds in the central area.
Through the Unit energy consumption history there is a possibility to see the unit's
consumption for the previous week.
There is also a possibility to add notification in the Add Notification section if the battery
level is low for example. Each unit can send an alert to the user via email or SMS in the
future.
After a notification is assigned, all active notifications can be seen in Active notifications.
28
Advertisement
Table of Contents
