Table of Contents
Advertisement
A possible cause of the phenomenon
1. Some units are connected to the controller but are out of range
2. After the initial definition, there were added disturbing units such as a cabinet, mirror
and any other possible factor
3. A unit appears in the list of units as MALFUNCTION, meaning an invalid unit
4. A concrete / reinforced wall that affects the local media
Recommendations for solving the problem
1. Add a relay unit to increase the range and check that there are no units that appear as
MALFUNCTION, that is, a valid unit, in the UNITS menu
2. Perform a procedure called Update Z-Wave network through the Z-WAVE menu in the
Settings tab
3. The unit must be removed from the list - either by resetting or re-adding or deleting, and
the unit can be replaced by selecting REPLACE after pressing the trash button
4. Position the antenna with respect to the frame plastic of the switch. The antenna should
exit the micro module
! Warnings!
Do not modify the unit in any way.
Risk of electrical shock.
Risk of fire.
Risk of burns.
Do not dispose the electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the
collection systems available.
37
Advertisement
Table of Contents
