1- Unpack The Sl2100 System - NEC SL2100 Quick Install Manual

Unpack the SL2100

1- Unpack the SL2100 System

SL2100 Chassis unit
1 x SL2100 system
1 x Wall mounting template
1 x Power cord (selected regions)
4 x Fixing screws (M4.1 x 25mm)
SL2100 CPU card
1 x CPU card
1 x Lithium battery (CR2032)
SL2100 Extension Interface card
1 x Interface card
SL2100 3COIDB card
1 x 3COIDB card
1 x Screw & spacer
Additional Items Required:

Cross head screwdriver.

Utility knife or small flush cutters to remove the plastic knockouts

4 Wall fixing plugs suitable for the type of wall.

Solid wire for extending telephone cabling:
Recommended cable type: Twisted pair (CW1308 or similar specification)
Conductor diameter: 0.4 to 0.6 mm
Maximum cable length: (with 0.5 mm diameter cable)
SL2100 system telephone – 300 metres
Normal telephone (SLT) – 1125 metres
If you need to extend the exchange line cables:

Solid wire for exchange line cables:

Recommended cable type: Twisted pair (CW1308 or similar specification)

Conductor diameter: 0.4 to 0.6 mm
Quick Install Guide – SL2100 with Analogue Trunks rev 1.1
8