Terms Used In This Manual - ABB RETA-02 User Manual

12
Drive configuration
activation of the communication
Network configuration
the network configuration.
Master configuration
configure the master system to communicate with the drive
Communication profiles
and the ABB Drives profile
Communication
through the RETA-02 module.
Diagnostics
the RETA-02 module.
Definitions and abbreviations
abbreviations concerning the PROFINET IO product family
Technical data
configurable settings and connectors of the module and the
specification of the Ethernet link.

Terms used in this manual

Communication Module
Communication Module is a name for a device (e.g. a fieldbus
adapter) through which the drive is connected to an external
communication network (e.g. a fieldbus). The communication with
the module is activated with a drive parameter.
MAC ID
Every node on Ethernet network has to have a unique identifier.
This node number is called MAC ID (Media Access Control ID).
Data Sets and Data Words
Each data set consists of three 16-bit words, i.e. data words. The
Control (or Command) Word and the Status Word, References
and Actual Values (see chapter Communication) are types of data
words; the contents of some data words are user-definable.
Introduction
contains a description of bus configuration and
explains the different methods of setting up
explains the basic principle on how to
describes the PROFIdrive drive profile
contains a description of how data is transmitted
explains how to trace faults with the status LEDs on
contains information on physical dimensions,
explains the definitions and