Uncrating Instructions - Billy Goat SC181HEU Owner's Manual

Uncrating Instructions

Your Billy Goat Sod Cutter is shipped from the factory in one crate, completely assembled.
Be Sure To:
•
Read all safety instructions before assembling unit.
•
Take caution when removing the unit from the box.
•
Put oil in engine before starting.
•
Check grease in bearings per service label on unit. Add grease as required. Use only
NLGL Grade 2 Multipurpose Lithium Base Grease in your machine.
To Uncrate Sod Cutter:
•
See Fig. 8
•
Open the crate from back side (handles of machine should be visible).
•
Set sod cutter to free wheel as shown in Fig. 6 (see Instruction Labels on
manual)
•
Roll the sod cutter out of crate from behind
Parts Bag & Literature Assy
Warranty card P/N- 400972
Owner's Manual P/N-373507
General Safety and Warranty manual P/N- 100295
Part No. 373507EN
Fig. 8
6
page 4 of
Form No. F062317A