Example 2: Adding A Tie To A Set Of Video And Audio Ties - Extron electronics MAV Plus Series User Manual

Operation, cont'd

Example 2: Adding a tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration.
The steps show the front panel indications that result from your action.
N This example assumes that you have performed example 1.
1.
Figure 3-11 — Clear all selections
2.
Press the RGBHV/Video button to toggle on and off.
Figure 3-12 — Select RGBHV or video only
3.
Figure 3-13 — Select an input
3-16 CrossPoint / MAV Matrix Switchers • Operation
Press and release the Esc button (figure 3-11).
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
To select video only for the tie, if necessary, press and release the RGBHV
(CrossPoint switchers) or Video (MAV Plus switchers) button and the Audio
button (figure 3-12).
VIDEO
The button lights green when selected.
Press and release the input 5 button (figure 3-13).
Press and release the Input 5 button.
The button lights green to indicate that video
outputs can be tied to or untied from this input.
1 2 3 4 5
17 18 19 20 21 22 23 24 32
The Output 3, Output 4, and Output 8 buttons light green to
indicate the RGBHV or video ties created in example 1.
1 2 3 4 5
17 18 19 20 21 22 23 24 32
I / O
AUDIO
Press the Audio button to toggle on and off.
The button is unlit or background illuminated when deselected.
6 7 8 16 I
N
P
U
T
S
O
6 7 8 16
U
T
P
U
T
S