Replacing, Moving, Or Adding Hard Drives; Identifying The Status Of A Hard Drive - HP P600 User Manual

Replacing, moving, or adding hard drives

In this section

Identifying the status of a hard drive

Recognizing hard drive failure
Replacing hard drives
Moving drives and arrays
Adding drives ...............................................................................................................................44
Identifying the status of a hard drive
When a drive is configured as a part of an array and connected to a powered-up
controller, the condition of the drive can be determined from the illumination
pattern of the hard drive status lights (LEDs).
Online/Activity Fault/UID LED
LED (green) (amber/blue)
On, off, or Alternating amber
flashing and blue
............................................................................................33
.....................................................................................................35
...................................................................................................................37
.............................................................................................................43
Interpretation
The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a
management application.
33