Diagnosing Array Problems; Controller Board Runtime Leds - HP P600 User Manual

Diagnosing array problems

In this section

Controller board runtime LEDs

Cache module LEDs.....................................................................................................................49
Diagnostic tools ............................................................................................................................50
Controller board runtime LEDs
LED ID Color
0 Amber
1 Amber
2 Blue
3 Blue
....................................................................................................47
NOTE: During server power-up, each runtime LED illuminates
randomly until POST has finished.
LED name and interpretation
CR510: Controller Failure LED. The controller firmware has detected an error.
CR511: Drive Failure LED. A physical drive connected to the controller has
failed. Check the Fault LED on each drive to determine which drive has failed.
CR512: Activity LED for SAS port 2I.
CR513: Activity LED for SAS port 1E and 1I.
47