Display; Display Test At Power Up - ABB REM 610 Operator's Manual

REM 610 REM 610
4.1.3.
4.1.3.1.
16
Motor Protection Relay
Operator's Manual - ANSI version
Left Up Down
Fig. 4.1.2.-1 Navigation push buttons
Use the navigation buttons to view, select and edit the wanted menu items.
Activate the main menu by pressing an arrow button.
*
Move between the menu levels and menu items by using the arrow buttons.
*
Select the item to be edited or store a new value by pressing
*
Increase or decrease the activated digit, shift the activated decimal point, or
*
navigate between options by using
Cancel and return the display to the previous mode (view mode or idle mode), by
*
pressing
Table 4.1.2.-1 Button navigation and editing
Wanted step or operation
Step downward in the main menu or a submenu
Step upward in the main menu or a submenu
Entering a submenu from the main menu or a higher submenu
Leaving a submenu for the main menu or a higher submenu
Increasing a value in the setting mode
Decreasing a value in the setting mode
Moving the cursor in the setting mode
Selecting the front connection at power up
Entering or leaving the setting mode, storing a new value
Entering the monitoring state
Adjusting the display contrast
Resetting or canceling, leaving the setting mode without storing a
new value
Resetting latched output contacts in the idle mode
Acknowledging and resetting targets, latched output contacts and
memorized values
Resetting thermal level to 0 at power up

Display

Display test at power up

When connecting the auxiliary voltage to the relay:
Right Enter Clear/ Clear/
Cancel Cancel
and .
1MRS755538
A040225
.
Push button
or
and
and
and or
for 5 s
and
and