How To Monitor Recorded Data - ABB REM 610 Operator's Manual

REM 610 REM 610
4.2.1.3.
28
Motor Protection Relay
Operator's Manual - ANSI version
- ABB
+
Ia x.xx
Ic x.xx
Fig. 4.2.1.2.-2 Activating the monitoring state
Before you can monitor the correct primary current values, the
parameters M80 and M83 must be correctly set via serial
communication.

How to monitor recorded data

The contents of the event register and the information on motor start ups are found
under the main menu group RECORDED DATA.
1. Press an arrow button to access the main menu.
to select RECORDED DATA in the main menu and press
2. Use or
the first event.
3. To navigate between the events, use
4. To enter a submenu, use
5. To return the display to the idle mode, press
-
Ib x.xx
In x.xx
and
and to exit, use
1MRS755538
.
.
.
to enter