Operating Modes; Auto Run; Off - Rain Bird ESP-SMTe User Manual

Operating Modes

When the ESP-SMTe Controller is powered on for the first
time, the option to select a programming mode is dis-
played.
This screen is also available under the Advanced Control-
ler Setup dial position (see page 15) or after a Factory
Default reset.

AUTO RUN

AUTO RUN is the normal operating mode for the controller.
Irrigation starts automatically when required, and the next
estimated watering date is displayed.
Turn the dial to AUTO RUN.
In AUTO Mode:
• The display shows the current day of the week, date,
time, and the next estimated watering day.
b c
NOTE: On a scheduled watering day, "Next Irrigation
Estimate will change to "Adjusted: 0%" and display any
automatic adjustments to irrigation.
During Watering:
• The display shows the current day, current active zone,
and the Time Remaining for that Zone.
10
ESP-SMTe Controller

OFF

Cancel all active watering immediately and stop
automatic irrigation.
Turn the dial to OFF.
– +
• Press or to adjust the LCD contrast if desired.
Controller Configuration and Zone Information settings
remain stored in memory while the controller is OFF or if
there is a loss of power. Date and time are also maintained
for up to 10 years by an internal battery. A 9V battery is not
required to maintain settings or date and time.
b c
NOTE: Automatic irrigation will NOT occur if the con-
troller remains in OFF mode.