Table of Contents
Advertisement
Copy Zone to Zone
Copy zone information from one zone to another zone.
Turn the dial to Input Zone Information.
A
Select Copy Zone to Zone.
B
Select the source Zone number (Copy From Zone).
C
Select up to three destination zones (To Zone); then
press NEXT.
D
Select COPY if the selections are correct.
E
Select QUIT to re-enter selections.
b
c
NOTE: If QUIT is selected, NOT COPIED will be dis-
played on the screen.
F
When the copy is complete, press NEXT.
30
ESP-SMTe Controller
Options
Reset Button
The Reset button resets the controller. Active watering is
canceled, and all previously programmed configuration
and zone information remains stored in memory. Irrigation
will resume on the next Allowed Watering Day.
Insert a small tool into the access hole and press until the
controller is reset.
b
c
NOTE: We suggest using a non-metallic object such as
a pencil or pen to press the Reset button.
Remote Accessories
b
c
NOTE: Use only Rain Bird approved devices with 5 pin
accessory port. Unapproved devices may damage
controller and void warranty.
• The front panel provides a port for the use of external
devices.
Advertisement
Table of Contents
