Show Dialplan Number - AddPac VoiceFinder AP1100 User Manual

VoiceFinder AP1100 VoIP Gateway User's Guide Version 1.1
5.7.6.7.4. Usage Guideline
Use the show dial-peer voice Administrator command to display the
configuration for all Voice over IP (VoIP) and plain old telephone service (POTS)
dial peers configured for the router. To show configuration information for only
one specific dial peer, use the argument number to identify the dial peer.
5.7.6.7.5. Examples
The following is sample output from the show dial-peer voice command for a
POTS dial peer:
show dial-peer voice
5.7.6.8.

show dialplan number

To show which dial peer is reached when a particular telephone number is
dialed, use the show dialplan number command in Administrator command
mode.
show dialplan number dial_string
5.7.6.8.1. Syntax
Keyword / Argument
dial_string
5.7.6.8.2. Default Value
No default behavior or values.
5.7.6.8.3. Command Mode
Administrator command
AddPac Technology Co., Ltd.
Description
Specifies a particular
(telephone number).
destination pattern
262
- -