Foscam FI9828P Quick Installation Manual

Quick Installation Guide

HD Wireless PTZ Dome IP Camera with P2P
Model:FI9828P
V4.6
EQ982809
CE Certi cate Website:
http://www.foscam.com/company/ce-certi cate.html
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com

Package Contents

Resource CD
IP Camera Power Adapter
Ethernet Cable Wi-Fi Antenna
Quick Installation Guide
HD Wireless PTZ Dome IP Camera
Model:FI9828P
Quick Installation Guide Warranty Card
Security Warning
Foscam cameras and NVRs require good security practices
to safeguard your privacy. You should regularly change
your camera or NVR password which is 8-10 numbers,
letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware installed
for your speci c model and better experience.
3

Access the IP Camera

1. Enable the DHCP feature of your router (Enabled by default
normally), then open the Equipment Search Tool program. It
should display the camera's IP address in your LAN (Local Area
Network).
2. Double click the camera listed here, and your default browser
will open up to the camera's login page. When log in for the rst
time, you will need to download and install the add-on. We will
use Internet Explorer as an example. For Google Chrome, Apple
Safari, or Mozilla Firefox, please refer to the User Manual.
Note：
Doesn't support 64-bit browser.
Click Install
1
Hardware Introduction
Physical Description
Antenna
Infrared LED
LENS
Power
Alarm in/out
Reset Button
Hardware Connection
WPS
1. Mount the antenna and make it stand vertically.
2. Connect the camera to the LAN network (Router or Switch)
via network cable.
3. Connect the power adapter to the camera.
1
3. After installing the add-on, refresh the browser and click
Login.
Default username is admin with
no password.
Main stream o ers the highest
quality video while Sub stream
o ers less quality, but also less
delay when viewing.
4. When you log in for the rst time, it will request that you
modify the default username and/or password. Input the New
username, New password, and Confirm the password
Modify to complete the modi cation. You will now use the new
username and password to login to the camera in the future.
4
2

Software Installation

1. Insert the CD into the CD drive of your computer.
2. Go to the folder "Equipment Search Tool" and nd the folder
"For Windows OS"or "For Mac OS". Copy and paste the
Equipment Search Tool le to your computer, or drag it onto
your desktop.
LAN
Audio in/out
Notes:
If your computer ( Windows OS ) supports autorun function,
you can nd the corresponding le in the opened control panel.
If your computer doesn't have CD drive, you can download
the Equipment Search Tool from our website for free.
2
5. After log in, you will see live video on the interface.
click
,
Notes:
After log in for the rst time, it will go to "Setup Wizard"
automatically. Please set the basic parameters, such as the
camera name, camera time, wireless settings and more.
If you forget your username or password, you can press and
hold the reset button on the cable of the camera using a pin for
5 seconds. This resets the camera to factory defaults.
If the IPC automatic focusing failed(image blur), you need to
click the Focus to manually adjusting focus.
5
3
6