Foscam FI9828P Quick Installation Manual

Quick Installation Guide
HD Wireless PTZ Dome IP Camera with P2P
Model:FI9828P
V4.1
EE200415
Foscam Digital Technologies
www.foscam.us www.foscam.ca www.foscam.co.uk
www.foscamgroup.com www.foscam.com
Package Contents 1
Power Adapter Ethernet Cable
IP Camera Resource CD
Quick Installation Guide
HD Wireless PTZ Dome IP Camera
Model:FI9828P
Wi-Fi Antenna Quick Installation Guide Security Warning Card
Security Warning
Foscam cameras require good security practices to
safeguard your privacy. You can help protect your camera
by changing the default username and/or password.
You should update your camera regularly at
http://www.foscam.us/firmware.html. Make sure your
camera has the latest firmware installed for your specific
camera model.
3
3. After installing the add-on, refresh the browser and click Login.
Access the IP Camera
in LAN
1. Enable the DHCP feature of your router (Enabled by default
normally), then open the IP Camera Tool program. It should
display the camera's IP address in your LAN (Local Area Network).
4. When you log in for the first time, it will request that you modify
2. Double click the camera listed here, and your default browser
will open up to the camera's login page. When log in for the first the default username and/or password. Input the New username,
New password, and Confirm the password
time, you will need to download and install the add-on. We will
use Internet Explorer as an example. For Google Chrome, Apple complete the modification. You will now use the new username
and password to login to the camera in the future.
Safari, or Mozilla Firefox, please refer to the User Manual.
Note：
Doesn't support 64-bit browser.
Click Install
Hardware Introduction
Physical Description
Antenna
LAN
Infrared LED
Audio in/out
LENS
Power
Alarm in/out
Reset Button
Default username is admin with
no password.
Main stream offers the highest
quality video while Sub stream
offers less quality, but also less
delay when viewing.
click Modify to
,
Notes:
automatically. Please set the basic parameters, such as the camera
name, camera time, wireless settings and more.
hold the reset button on the cable of the camera using a pin for 5
seconds. This resets the camera to factory defaults.
Input the New username,
New password and
Confirm the password.
please continue with the setup by following the Wireless and
Remote Access steps below.
Hardware Connection
WPS
1. Mount the antenna and make it stand vertically.
2. Connect the camera to the LAN network (Router or Switch)
via network cable.
3. Connect the power adapter to the camera.
5. After log in, you will see live video on the interface.
After log in for the first time, it will go to "Setup Wizard"
If you forget your username or password, you can press and
If you want to access your camera over wireless or the Internet,
2

Software Installation

1. Insert the CD into the CD drive of your computer.
2. Go to the folder "IP Camera Search Tool" and find the folder
"For Windows OS"or "For Mac OS". Copy and paste the IP camera
tool file to your computer, or drag it onto your desktop.
Shortcut icon for Windows OS Shortcut icon for Mac OS
Notes:
If your computer ( Windows OS ) supports autorun function ,
you can find the corresponding file in the opened control panel.
If your computer doesn't have CD drive, you can download
the IP camera tool from our website for free.
4
Wireless Connection
1. Choose "Settings" on the top of the camera page, then
go to "Network - Wireless Settings" section on the left side
of the screen. From here, click Scan.
Click through different pages to see
other wireless networks if there are
more than 10.
2. Click the SSID (name of your router) in the list, and the
corresponding SSID and encryption will be filled into the
relevant fields automatically on the right side of the page.
All you need to do is input the password for your wireless
network.