Defined Area - Fargo DTC4500e User Manual

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
4.14

Defined Area

The Defined Area option can be used with the K Panel Resin or the Overlay / Print Area tabs to
define one or more specific areas.
In the samples, the defined area is indicated by the dashed outline.
Method for Defining a Single Area
Step
1
2
3
4
Method for Defining Multiple Areas
Step
1
2
3
4
5
Page 70
Procedure
On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
Print a card and look at it in the same orientation as when it exits the printer.
Measure the total size of the area and enter the dimensions into the dimension boxes.
Measure from the lower-left corner of the card to the lower-left corner of the defined area
and enter the values into the X and Y boxes.
Procedure
On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
Print a card with a defined area and look at it in the same orientation as when it exits the
printer.
Measure the defined area location based on the printed card.
To define another area, click the Defined Area up-arrow.
Use the Defined Area arrows to navigate back and forth from area to area.
April 2014