Print Driver Installation; Driver Installation Instructions - Fargo DTC4500e User Manual

3

Print Driver Installation

This section describes the printer driver installation requirements and standard procedures.
Requirements are listed below. The DTC4500e Print Driver supports the following:
• Windows Vista 32 bit with SP2
• Windows Vista 64 bit with SP2
• Windows XP 32 bit with SP3
• Windows Server 2003 (R1) 32 bit
• Windows Server 2008 (R1) 32 bit with SP2
• Windows Server 2008 (R1) 64 bit with SP2
• Windows Server 2008 R2
• Windows 7 32 bit and 64 bit
• Windows 8 32 bit and 64 bit
For more information on supported operating systems, please visit the HID Global support page.
3.1

Driver Installation Instructions

Start the installation process by inserting the Driver CD into the computer; then, follow the
Installaware Wizard screen prompts.
Step Procedure
1 Select Install the Printer Driver to start the driver installation.
2 Select the FARGO Workbench Utility Program to install the Diagnostic program.
3 All versions of Windows require Administrator rights.
From the Printer & Faxes, select Printing Preferences to setup the printer driver after it
4
has been installed.
5 Use the drop down arrows to select the correct options for each printing preference.
April 2014
DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 25